Expert Answers about Chevrolet Trailer Spindles
- What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
- The Trailer Hub Assembly # 84550BX that you referenced will use # L68149 as the inner bearing and # L44649 as the outer bearing. These are the inner and outer bearings used by a # 84 spindle.
We offer the following spindles:
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR [R2061-284]
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter (9" OAL) # TRU74FR [R20384EZ]
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4"...
view full answer... - Recommended 2,000 lbs Idler Hub and Replacement Spindle w/ a 4 on 4 Hub
- Thanks for the pictures! If your spindle is 3-3/4" with the threads included then the Easy Grease Trailer Idler Hub Assembly item # AKIHUB-440-2-G-EZ-1K will not fit. This would be why you couldn't get the castle nut to thread. It sounds like you have a stub style spindle which we do not have a replacement option for since it's much shorter in length than standard spindles.
To avoid anymore hassle of trying to find replacement parts for an obsolete trailer spindle, I recommend replacing...
view full answer... - Is Dexter Trailer Hub 84545UC1-EZ Compatible with Spindle # TRU74FR
- Yes, trailer hub # 84545UC1-EZ is a fit for spindle # TRU84FR. This is a number 84 spindle that takes the same bearings and seals that are included with the hub. However, the hub is an EZ lube hub and the spindle is not. For a compatible EZ lube spindle use # TRU74FR. This spindle also has a brake mounting flange.
view full answer... - Will TruRyde Spindle TRU57FR Fit Dexter Trailer Hub Assembly 42865-KIT
- The TruRyde #42 Spindle # TRU57FR is compatible with the Dexter Trailer Hub Assembly # 42865-KIT. Since the hub uses bearings 25580 and 14125A, whose inner diameters match up to the spindle dimensions, the hub will work on the spindle.
Spindles need to be professionally welded on perfectly straight and concentric to ensure you do not have issues with trailer tracking or uneven tire wear.
view full answer... - Which Trailer Spindles Fit Trailer Hub Assembly # 84555UC1
- I have three options that will fit Trailer Hub Assembly # 84555UC1, for 3,500 lbs.
Part # TRU64FR is a standard 1-3/4-inch round spindle that measures 8-1/4" in overall length.
Part # TRU84FR is a standard 1-3/4-inch round spindle that measures 11-1/4" in overall length.
Part # TRU74FR is an EZ lube 1-3/4-inch round spindle with a grease zerk that allows you to pump grease internally into the spindle. It also contains a brake mounting flange. It measures 9" in overall length.
Installing...
view full answer... - Replacement Spindle for Procraft Trailer
- I was unable to reference a spindle with the number BT151; the best I could find in reference to BT151 is a hub kit for an E-Z Loader trailer, though it did not mention the specific bearings it used which would help identify which spindle you need. Knowing your axle capacity will also help narrow down your choices, or you can measure your spindle with a digital caliper where the bearings and grease seal ride and use that information to compare it to the chart on the Trailer Spindles page...
view full answer... - Which Spindle is Compatible with the 8-213-5UC1-EZ Trailer Hub Assembly
- For a spindle that will work with the # 8-213-5UC1-EZ Trailer Hub Assembly, you will want to use the EZ Lube Spindle # TRU37FR.
This EZ lube spindle has a 2,600 pound capacity, making it great for 5,200 pound trailer axles. I have attached a photo showing the dimensions of this spindle for you.
This spindle is compatible with the LM67048 outer bearing and 25580 inner bearing, as well as the 10-10 grease seal that come with the # 8-213-5UC1 hub and drum.
view full answer... - Replacement Spindle and Hub For 3/4 Straight Spindle
- I recommend updating your axle spindles to the the BTR E-Z Lube Spindle # TRU44FR as we do not have hubs that fit a 3/4" spindle. This is the more common 1-1/16" diameter spindle and will allow you to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. This hub is a 4 on 4" bolt pattern and with the spindle above will allow you to fill your hubs with Grease # L11465 using a Grease Gun # L30416 through the rubber cap on the grease cap.
view full answer... - Is It Actually Easy to Replace Spindle on 2,000 lb Timbren Axle-Less System
- That's a good question, and it wouldn't be just the spindle itself that gets replaced on the Timbren Axle-Less systems, it would be the whole spindle arm that would need to be replaced if there was any damage. If you take a look at the photo I added of the Timbren Axle-Less Trailer Suspension System # ASR2000S01 you can see that the spindle arm is a separate part. So to replace the spindle you would just unbolt the arm and then bolt on the new arm which has the spindle on it.
As for a...
view full answer... - Which Trailer Spindles Will Take CE Smith Pre-Greased Trailer Hub 13110
- The Pre-Greased trailer hub # CE13110 fits on BT8 spindles such as # TRU94FR. The hub uses inner and outer bearing L44643 and a grease seal with inner diameter of 1.249 inches and outer diameter of 1.983 inches. This is exactly what you would find on a BT8 spindle.
Installing a spindle is a precision job that requires a qualified professional to install/weld onto the trailer. If there is an RV dealer with a service center near you, they could probably do the job.
view full answer... - Recommendation Of Trailer Hubs & Drums For Dexter 2000 lb Axle W/EZ Lube Spindles
- The Dexter Axle Trailer Hubs & Drums Item # 8-257-5UC3 could fit your axle depending on the spindle size. A BTR spindle uses Item # L44610 bearings for both the inner and outer. You can check your bearing numbers or measure your spindles where the bearings ride to determine if you have a BTR spindle or not. You can measure where bearings sit using a digital caliper like Item # PTW80157. BTR spindles will have a 1.063 inches measurement.
view full answer... - Replacement Bearing Kit for Alite 300 Pop Up Camper Trailer
- It looks like your Alite 300 trailer has a 2,000 lb axle so you likely either have a 1" straight spindle or a 1.063" straight spindle. For a 1" straight spindle (also known as BT8) you need the Bearing Kit # BK1-100 but for a 1.063" straight spindle you need the Bearing Kit # BK1-150 instead.
To determine which kit is correct for your trailer you need to pull the hub and look at your bearing numbers or measure the diameter of the spindle with a digital caliper. The 1" spindle will use...
view full answer... - Correct Spindle Size for 2008 Triton Boat Trailer
- I did some research on a 2008 Triton Boat Trailer and there are various types of boat trailers under this brand, so it is difficult to determine a compatible spindle. In order to determine what type of spindle your trailer has, you can take a few measurements. I have attached an image that shows the measurements to take as well as how to determine the compatible bearings, races and grease seals.
I have also included a link that takes you to our available selection of spindles.
view full answer... - Agricultural Spindle and Hub Combinations with 6 on 6 Inch and 8 on 8 Inch Bolt Patterns
- The correct trailer hub to use with the Agricultural Spindle part # TRU67FR is the Trailer Hub Assembly part # AH60880FCOMP which features an 8 on 8" bolt pattern. The Dexter Trailer Idler Hub Assembly part # 42660UC1 will not fit the Agricultural Spindle part # TRU67FR but it will fit the EZ Lube Spindle part # TRU37FR. We also have the Agricultural Spindle part # TRU34FR which can be paired with the Complete Agricultural Hub Assembly part # AH30660FCOMP. I have attached the pairs for...
view full answer... - How to Choose Correct Replacement Trailer Spindle
- Definitely feel free to send in a photo of the damaged spindle, but photos can only help out so much. The best way to know we're getting you the correct spindle replacement is for you to measure the spots along the spindle where the bearings and seal are seated, as well as note the weight capacity of your trailer axle. Once we know all of this we can filter through our selection and find the best replacement option for you.
For example, the #84 spindle # TRU64FR uses inner bearing # L68149,...
view full answer... - Spindles That Will Work With Dexter Trailer Hub Assembly # 84545UC1-EZ
- We offer 3 spindles that have the dimensions compatible with the Dexter Trailer Hub Assembly, part # 84545UC1-EZ.
The first is part # TRU74FR. This is a 1.75 inch round EZ-Lube spindle with a grease fitting and a brake flange. This spindle has an overall length of 9 inches.
The next is part # TRU64FR. This is a 1.75 round spindle that does not have the brake flange or grease zerk fitting. This spindle has an overall length of 8-1/4 inches.
The third is part # TRU24FR. This is a 2 inch...
view full answer... - Is There An Easy Way To Determine The Correct Replacement Spindle For a 16 Foot Enclosed Trailer?
- You maybe able to locate an axle tag on your axle which will have a serial number that will help to identify the correct size spindle for your Interstate enclosed trailer. Typically enclosed trailers of your size will use a drop spindle like the #84 E-Z Lube Spindle # TRU87FR which is designed for 3,500lb axles. If you have a torsion style axle it will likely need a Spindle # TRU74FR but would have to verify with existing axle if you cannot find a axle tag.
view full answer... - What Size are the Bearings in the Titan Disc Brake Kit # T4747200 and the Spindles That They Fit
- The bearings that are included in the Titan Disc Brake Kit, part # T4747200, are the # L44649 for the outer bearing and the # L68149 for the inner bearing. The # L44649 outer bearing has an inside diameter of 1.063, which is 1-1/16 inches and the # L68149 inner bearing has an inside diameter of 1.378, which is 1-3/8 inches. These dimensions match the dimensions on your spindle.
The Titan Disc Brake kit will work on tandem axle trailers with 3,500-lb axles and a wheel size of 14 inch or...
view full answer... - Recommended Hub/Drum for Timbren 3,500 Lb Axle-Less Trailer Suspension System
- The Timbren Heavy-Duty Axle-Less Trailer Suspension is offered with a straight spindle using part # ASR35HDS01 and a 2" lift spindle using part # TASR35HDS06. They both use the same brake mounting flanges but the bearings are different. The straight spindles use a 25580 inner/LM67048 outer bearing and the lift spindles use a 25580 inner/15123 outer bearing.
For a braking assembly on either spindle I recommend the Electric Trailer Brake Kit part # AKEBRK-7-SA which are self adjusting brakes...
view full answer... - Dexter Hub and BT8 Trailer Spindle Compatibility
- Yes, this Trailer Idler Hub Assembly, # AKIHUB-440-2-1K, is compatible with our TruRyde BT8 Spindle, # TRU94FR. The BT8 spindle requires inner and outer bearing L44643 and a grease seal with an inner diameter of 1.24 inches, which the hub uses. This hub and spindle combination was designed for a 2,000 lb trailer axle.
The only additional item that you will want is suitable trailer grease. We use red grease like part # L11380.
view full answer...
Go To Results